FAQ

To serve you better, we've assembled a list of our customers' most frequently asked questions. If you don't find your answer here, feel free to contact us.

You may not have - the numbers on your meter may have been transposed or hard to read. You could possibly have a leaky toilet or faucet that's difficult to detect. Just call the office and we'll work with you to solve the problem.

Check your meter and the surrounding area for possible leaks. Next, call our office and report low pressure for your area.

A repair could have been completed recently allowing air to enter the line, causing the milky look. Also, when the fire department does their annual flushing of the fire hydrants, this can stir up the sediments in the line. The water is chlorinated and is perfectly safe.

Only chemicals that are approved by the National Safety Foundation for treatment of drinking water. Chlorine and Flouride are added to our water at the supplier's location.

All public water systems are required to maintain a minimum chlorine level of 0.2 mg/L (tested at the end of each line) by state law. Systems that use chloramine as a disinfectant must maintain a level of 0.5 mg/L by state law. Our disinfectant levels are tested twice monthly at 15 rotating locations to ensure safety.

Most likely your water heater needs to be flushed. CAUTION: Most manufacturers recommend hiring a professional to flush your water heater. If you plan on doing this yourself, read the owner's manual to keep from being hurt and or damaging the water heater.

We may have received it after the due date or we may not have received it at all. Call our office and we will help you solve the problem.

The Arkansas Department of Health compiles and keeps a list of licensed Backflow Technicians. Click Here to go to their site.